Health Science AAC-SGD - 23 Years of Excellence

Company E-mail:
healthscience@comcast.net

Health Science
418 Wall Street
Princeton, NJ 08540

Tel: 800-841-8923
Tel: 609-924-7616
Fax: 609-924-0793

• Easy to use.
• Variety of angles and heights can be achieved within seconds.
• Can hold up to 15 lbs.
• Light weight.
• Can swing away to the side.
• Installs in minutes not hours.
• Can change to clients new chair with minimum to no charge.
• Can mount on the left or right side.

• Easy to assemble and disassemble.
• Fully adjustable-Base turns 360 degrees.
• Lightweight.
• Max load 5lbs.
• Come with device quick release.
• Choice of length 9" to 16" or 16" to 21".
• Mounts to both left and right side.
• Mounts to square or round tubing.
• Mounts to wheelchairs, hospital beds, walkers,IV poles and more.

• The Adjustable Floor Stand mount is ready for use anywhere at anytime.
• Whether you want to access your communication devices in a bed, on a sofa, on the floor, in your wheel chair, or standing up, the Adjustable Floor Stand can do the job.
• With its quick adjusting knobs and 360 degree turning capability, it is the perfect stand for achieving multiple positions.

• The Tag-A-Long attaches to walkers using the TSP clamping system, which is capable of being either a quick release or lock down clamp.
• The Tag-A-Long allows communication devices, and notebook computers of be mounted to the rear of the walker without inhibiting the mobility or balance of the walker.
• The unit can be modified for carrying dual bags for personal belongings, small ventilators or whatever else you want to tag-a-long with you.

• Just strap and GO!
• Can be used with a variety of AAC devices and comes with a custom device tray to securely hold your AAC unit in place.

• The DAESSY Rigid Mount provides a simple but highly adaptable and adjustable support structure for Mounting laptop computers or communication devices on wheelchairs.
• The Mount consists of two lengths of tube Rigidly connected to form a right angle structure.
• The Mounted device is attached to a horizontal tube crossing the wheelchair and supported by a vertical tube in a clamp that is permanently attached to the wheelchair.
• Both left or right-hand Mounting are possible and the Mount can be precisely positioned for accessibility by the user.

• The DAESSY Folding Mount as the name implies can be folded away from the user.
• The two tubes of the Mount are connected by a flexible joint and except for this feature it is identical to the Rigid Mount.
• The flexible joint allows the horizontal tube, with the device attached or removed, to be lifted up to the side until the two tubes are parallel in a straight-up orientation and then rotated down until parallel to the vertical tube alongside the wheelchair.
• When folded and removed from the wheelchair the Folding Mount forms a more compact structure than the Rigid Mount.

• The DAESSY Locking Swing-Away Mount (DLSA7) was developed in response to many requests for a device Mount that could be moved out of the way and back into place by the user.
• Similar in appearance to the Rigid Mount but very different in structure the Locking Swing-Away Mount consists of a single length of tube bent to a right angle shape and supported in a clamp that allows the Mount to be swung away from the user in the manner of a gate.
• A Locking mechanism located at the clamp and operated by a cable running underneath the Mounted device controls the swing-away action.

• The DAESSY Rear Folding Mount (DRFM6) also allows a device to be precisely positioned for use but with this Mount the device is folded away behind the backrest of the wheelchair when not needed.
• Unlike the other DAESSY Mounts the Rear Folding Mount is permanently attached part way down the side of the wheelchair and cannot be lifted out of its attachment clamp.
• Two flexible joints, one located at the attachment to the wheelchair the other between the two tubes permit a three step Rearward Folding action.

• The Desk Mount is most commonly used in conjunction with one of the DAESSY wheelchair Mounts and allows a device to be positioned on a desk or table at precisely the same orientation as it is on the wheelchair.
• The Desk Mount consists of a base and U-shaped tube that holds the attachment fitting for the device on its adapter.